Lenco Marine Computer Drive KDV 310 User Manual

User Manual  
KITCHEN DVD/CD PLAYER WITH RADIO  
ALARM & DVB-T RECEPTION  
AND REMOTE CONTROL  
MODEL: KDV-310  
SELECT  
READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING.  
PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE.  
THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE.  
 
Illustration of the Controls/Jacks On the Main Unit  
1. FM ANTENNA  
1 2  
3
4
5 6  
7
2. AM ANTENNA IN  
3. TV ANTENNA IN  
4. AUDIO JACKS  
5. VIDEO JACK  
6. DC IN JACK  
7. AC SOCKET  
8. TFT DISPLAY  
9. CD DOOR  
10. VOLUME + BUTTON  
11. CD DOOR OPEN/CLOSE BUTTON  
12. VOLUME - BUTTON  
13. TIME BUTTON  
8
14. ALARM BUTTON  
15. MEMORY BUTTON  
16. LCD DISPLAY  
17. MEM UP & F.FWD BUTTON  
18. MEM DOWN & F.BWD BUTTON  
19. NEXT & TUNE UP BUTTON  
20. DVD/DVB-T INDICATOR  
21. RADIO INDICATOR  
22. STANDBY BUTTON  
23. STOP/BAND BUTTON  
24. PLAY/PAUSE BUTTON  
25. MENU BUTTON  
26. FUNCTION BUTTON  
27. PREVIOUS & TUNE DOWN BUTTON  
28. COUNT DOWN BUTTON  
29. DISPLAY ROTATOR  
30. VOLTAGE SELECTOR (OPTIONAL)  
31. REMOTE SENSOR  
11 13 15 17 19 2021  
10 12 14 16 18 31  
22  
9
23  
24  
25  
26  
27  
28  
29  
30  
GB-2  
 
y
y
Read through the instructions before connecting other  
equipment.  
Ensure that you observe the color coding when connecting  
audio, video cables.  
Illustration of the Keys on the Remote  
Controller and Their Main Functions  
15  
16  
Note:  
y
During DVD play, the TV volume may be at a lower level  
17  
18  
19  
1
2
3
4
5
than during TV broadcasts, etc. If this is the case, adjust the  
volume to the desired level.  
y
If the DVD/CD player is connected to the TV through a  
video cassette recorder, the picture may not be played back  
normally with some DVDs. If this is the case, do not connect  
the player via the VCR.  
CONNECTING TO A STEREO TV SET  
6
7
8
21  
22  
SELECT  
To power outlet  
9
23  
10  
11  
12  
13  
14  
24  
25  
AC power cord  
To video input connector (yellow)  
27  
RL  
To audio input connectors (red, white)  
1. FUNCTION button  
2. VOL + button  
Video/audio cable  
3. VOL - button  
4. REPEAT button  
5. MENU/TITLE button  
6. SUBTITLE button  
7. ANGLE/ST/MONO button  
8. AUDIO button  
9. ZOOM button  
10. TEXT/SLOW button  
11. MEM DOWN & F.BWD button  
12. MEM UP & F.FWD button  
13. MUTE button  
14. TIME button  
15. DISPLAY button  
16. SETUP button  
17. STANDBY button  
18. NUMERIC buttons  
19. CLEAR button  
CONNECTING TO A CAR ADAPTOR  
The 12V car power adaptor is designed for use with vehicles  
that have a 12V/24V, negative ground electrical system.  
WARNING:  
Disconnect the car power adaptor when not in use.  
20. STOP & BAND button  
21. OK/PLAY/PAUSE button  
22. NAVIGATION buttons  
23. PROG/EPG button  
24. TUNE UP & NEXT button  
25. TUNE DOWN & PREV. button  
26. SEARCH button  
To the cigarette lighter socket  
27. COUNT DOWN button  
BASIC CONNECTION  
y
y
It is recommended to be connected to a multi-system TV.  
Ensure that this player and other equipment to be  
connected to the unit are in the standby or off mode and  
disconnect the AC power cords before commencing  
connection.  
CAUTIONS:  
y Use the unit only with 12V car power adaptor, use with other  
car power adaptor could damage the unit.  
y The recommended 12V car power adaptor is for use with  
this unit only. Do not use it with other equipment.  
y
Do not block ventilation holes of any piece of the equipment  
and arrange them so that air can circulate freely.  
GB-3  
 
y In the interests of road traffic safety, do not operate the unit  
or view video software while driving a vehicle.  
y Make sure the unit is fastened securely to prevent from  
moving outside of the vehicle in an accident.  
y When the inside of the cigarette lighter socket is dirty with  
ashes or dust, the plug section may become hot due to poor  
contact. Be sure to clean the cigarette lighter socket before  
use.  
REPEAT  
Press REPEAT button during play, it will repeat play one  
chapter/title or repeat all (DVD disc), or repeat play a track or  
all tracks (for CD), or repeat the specified points (A-B).  
SEARCH FOR PREFERRED SCENE  
1. Press SEARCH button during play and highlight the item to  
be played (Title, Chapter, or Chapter time) by navigation  
buttons.  
2. Input the desired number or time via the numeric buttons.  
3. Press OK button to confirm and the playback from the  
located scene starts.  
y After use, disconnect the 12V car power adaptor from both  
the unit and cigarette lighter socket.  
FUSE REPLACEMENT  
FUSE  
4. To exit search menu, press SEARCH button directly.  
Note: during DVB play mode, press SEARCH button to auto  
searching the TV channels directly.  
PROGRAM PLAY (UP TO 16 MEMORIES FOR DVD/CD)  
1. Press PROGRAM/EPG during playback to display the  
program menu.  
OPERATIONS  
PREPARATION  
Power on the TV set and select video input mode.  
2. Select location(s) to be memorized via NAVIGATION buttons  
and then enter desired Titles/Chapters numbers via  
NUMERIC buttons.  
GET STARTED  
1. Turn on the player via STANDBY button and press  
FUNCTION button several times to switch to DVD mode.  
The DVD/DVB-T indicator is lit.  
2. Press CD door OPEN/CLOSE button on the unit to open the  
disc tray.  
3. Place a disc onto the disc tray.  
4. Close the disc tray via CD door OPEN/CLOSE button and  
the playback starts automatically.  
Note: Inputting leading zero is not necessary. If the  
chapter/title/track number is behind the cardinal 10, press  
the +10 first and then another unit digit. Some figure inputs  
may be useless, because it's greater figure than total  
title/chapter/track number on the disc.  
Example: Track 3, press "3"  
Track 12, press "+10" and then "2"  
Track 21, press "+10" twice, and then "1"  
5. When a menu screen appears on the TV, move the  
NAVIGATION buttons or press the numeric buttons to select  
a preferred track number to start playback.  
3. To start programmed playback, select PLAY on the menu  
and press OK button; pressing PROGRAM/EPG button  
again to exit programming.  
4. To clear all items, select the <CLEAR> on the menu, and  
then press OK button.  
5. You can also cancel program mode by clearing all the items  
in the program menu by CLEAR button on the remote.  
ADJUST THE VOLUME  
Press VOLUME +/- button to adjust the volume level (The LCD  
shows the corresponding volume value during adjustment).  
MUTE BUTTON  
ZOOM PLAY  
During playback, press MUTE button on the remote to mute the  
unit (the LCD shows mute icon) and press VOLUME button or  
MUTE button again to resume normal play.  
Press the ZOOM key continuously to zoom in the picture by 1,  
2, and 3 times, zoom out by 1/2, 1/3, 1/4 normal size.  
Press this key once more when the picture is at 1/4 size to  
return to the normal size display.  
SKIP AHEAD OR BACK  
Scroll to view the enlarged picture using Navigation buttons.  
Press NEXT&TUNE UP or PREV&TUNE DOWN button once  
during play to skip a chapter (DVD) or a track (CD) ahead or  
backwards.  
ON SCREEN DISPLAY INFORMATION  
When the player is in operation, press DISPLAY button  
continuously on the remote control, the screen will display parts  
of information (current disc type, title number, chapter number,  
playtime, audio language, audio type, subtitle language and  
multi angle, etc) in a sequence.  
RAPID ADVANCE/REVERSE  
During playback, press MEM UP & F.FWD button or MEM  
DOWN & F.BWD button several times to scan the disc forward  
or backward at X2, X4, X8, X20 normal speed.  
Press PLAY button to resume normal play.  
CHANGING AUDIO SOUNDTRACK LANGUAGE (DVD  
DISC)  
It is possible to change the audio soundtrack language to a  
different language from the one selected at the initial settings  
(This operation works only with discs on which multiple audio  
soundtrack languages are recorded).  
Press AUDIO button during DVD disc play, the sound track  
language changes with the current sound track number shown  
on the TV screen.  
NOTE: When no soundtrack languages are recorded, pressing  
this button will not work.  
STOP PLAYBACK  
Press STOP button during playback to stop playback; the  
player activates its resume function when STOP is pressed in  
PLAY mode; press PLAY button again, playback resumes at  
the point it stopped previously; open the disc tray or press the  
STOP button one more time to clear the resume function.  
SLOW-MOTION PLAY (DVD)  
Press SLOW button on the remote control during playback, the  
disc will be played at 1/ 2 normal speed at first, each time this  
button is pressed, the play speed becomes slower (down to 1/7  
normal speed.)  
MULTI-ANGLE VIEWING (DVD ONLY)  
Press ANGLE/ST/MONO button during playback to display the  
number of angles being played and then select a desired angle  
to view the scene.  
Press PLAY button, normal play will resume.  
GB-4  
 
Note: only the DVDs shot with multi-angle scenes have this  
function.  
COMMON PROCEDURES FOR INITIAL SETTINGS  
1. Press SETUP button.  
2. Use the navigation buttons to select the item you want to  
modify, setting page with further setting items displayed  
shows on the TV screen. Again use navigation buttons to  
make changes. Press OK button to confirm modifications.  
3. Use navigation buttons to switch to another setting on the  
main setting page.  
CHANGING SUBTITLE LANGUAGE (DVD ONLY)  
Press SUBTITLE button during playback, the subtitle language  
shown on the screen will change as a response to each press;  
When the desired language appears, release the button to view  
the subtitle in that language.  
Note: This function only works on the DVDs recorded with  
multi-language.  
4. Press SETUP button to exit main setting page.  
1. SYSTEM SETUP  
1.1 TV SYSTEM - it is used to select the TV mode.  
Please select this option as per your TV set.  
1.2 LCD MODE - it is used to select the LCD display mode.  
Options: 4:3  
RETURNING TO MAIN MENU AND PLAYING TITLE (DVD)  
During playback, press MENU/TITLE button to return to main  
menu.  
Press MENU/TITLE button to play title when the main menu is  
played.  
16:9  
1.3 TV TYPE - it is used to select the TV scan mode, please set  
as per your TV set.  
Options: 4:3PS : Normal Pan & scan mode  
4:3LB : Normal Letter box mode  
16:9 : 16:9 wide screen mode  
1.4 PASSWORD - input password to unlock the system.  
The steps are as follows:  
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item by  
scrolling the down navigation button, and then press the right  
navigation button to select the input box.  
1.4.2 Input user's password "0000" to unlock it, in this case,  
select the input box again to change the password by inputing  
another new four numeric numbers and then press OK button  
to confirm. When the password is changed, you are needed to  
input the new one to unlock the system.  
1.4.3 Once you forget your own password, use the supervisor's  
password "8200" to unlock it.  
NOTE: If wrong password was input in unlock status, the  
system will lock.  
1.5 RATING - Set the rating of this player. If you want to change  
the rating of parental lock, please input the password to unlock  
first.  
MP3 PLAYBACK  
1. Load the MP3 disc onto the disc tray and the TV screen will  
show all its folders after a few seconds.  
2. Select the folder you want by the navigation buttons and  
then OK button to confirm.  
3. The files in this folder are displayed and select your  
favourable song via navigation buttons and press OK button  
to start playback.  
4. Press NEXT/TUNE UP button and PREV/TUNE DOWN  
button to select track directly.  
5. Press REPEAT button change play mode.  
KODAK PICTURE CD / JPEG CD PLAYBACK  
Slide show of Kodak Picture CD after being loaded begins  
automatically;  
Folders of JPEG picture CD after being loaded are displayed  
on the TV screen; use the NAVIGATION buttons to select the  
desired pictures to start playback.  
KODAK PICTURE CD / JPEG CD OPERATIONS  
1. PLAY MODES  
Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R / 6 R /  
7 NC-17 / 8 ADULT  
1.6 DEFAULT - Reset to factory settings.  
Options: RESTORE  
Press REPEAT button during play to change the play modes.  
During playback, press STOP to enter preview mode.  
2. SKIP TO NEXT/PREVIOUS PICTURE  
Press NEXT button to skip to the next picture or PREV button  
to the previous picture.  
1.7 EXIT SETUP - Select it to exit the setup menu.  
Press Play/Pause button to resume normal playback.  
3. PICTURE ROTATIONS  
Press RIGHT and LEFT NAVIGATION buttons to rotate the  
picture clockwise and anti-clockwise respectively.  
4. PICTURE FLIPS  
2. LANGUAGE SETUP  
2.1 OSD LANGUAGE - It is used to select different On Screen  
Display language for different user.  
2.2 AUDIO LANG - select preferred audio language. (DVD only,  
need disc software support)  
2.3 SUBTITLE LANG - Select preferred subtitle language.  
(DVD only, need disc software support)  
2.4 MENU LANG - Select preferred disc menu language. (DVD  
only, need disc software support)  
Press UP NAVIGATION button to flip the picture vertically.  
Press DOWN NAVIGATION button to flip the picture  
horizontally.  
5. PICTURE ZOOM IN/OUT  
2.5 EXIT SETUP - Select it to exit the setup menu.  
Press ZOOM button continuously, the picture zooms in by 1, 2,  
3 times or zooms out by 1/2, 1/3, 1/4 the original size.  
Press this button once more when the picture getting 1/4 size  
to return to the normal play.  
If the picture is enlarged, you may use the navigation buttons to  
view blocked parts of the picture.  
6. SLIDE SHOW TRANSITION MODES  
During slide show playback, press the PROGRAM button  
cyclically to select one of the slide effect to play.  
3. VIDEO SETUP  
3.1 BRIGHTNESS - To set the brightness for the display.  
Options: 0/2/4/6/8/10/12  
3.2 CONTRAST - To set the contrast effect for display.  
Options: 0/2/4/6/8/10/12  
3.3 HUE - To set the colour impression for display.  
Options: -6/-4/-2/0/+2/+4/+6  
3.4 SATURATION - to set the saturation level for display.  
Options: 0/2/4/6/8/10/12  
3.5 EXIT SETUP - Select it to exit the setup menu.  
INITIAL SETTINGS  
Initial settings page is for you to make your preferred settings  
up for your player. Once the initial settings are done they are  
retained in the CPU of the player until otherwise modified.  
GB-5  
 
4. SPEAKER SETUP  
4.1 DOWNMIX  
2. Press NEXT/TUNE UP button or PREVIOUS/TUNE DOWN  
button to adjust hour.  
Options: LT/RT - Left/Right mix mode  
STEREO - Stereo mode  
4.2 EXIT SETUP - Select it to exit the setup menu.  
3. After adjustment, press CD DOOR OPEN/CLOSE button  
again to confirm and the minute flashes for adjusting.  
4. Use NEXT/TUNE UP button or PREVIOUS/TUNE DOWN  
button to adjust minute.  
5. Finally, press OK button to save the time.  
Note: You only could set time in standby mode.  
RADIO OPERATION  
TO PLAY THE RADIO  
1. Press FUNCTION button repeatedly to switch to RADIO  
mode (At the moment, the TFT display will be turned off), the  
radio Indicator will light up and the LCD shows the current  
frequency and band.  
2. Select the desired band with STOP/BAND button until your  
desired band shows in the LCD.  
3. Tune to the desired station by pressing TUNE UP/DOWN  
button (Press TUNE UP/DOWN button repeatedly until you  
get the strongest clearest sound).  
4. When receiving a FM ST station, the relative icon will show in  
the LCD.  
5. The AM antenna and external FM ANTENNA are directional.  
y When receiving an FM broadcast, unfold the FM antenna  
and place it in the best position for the best reception.  
y For AM broadcasts, rotate AM antenna until the best  
reception is heard.  
ALARM OPERATION  
The unit is with alarm function, you could set alarm as below  
steps in standby mode:  
1. Press and hold ALARM button on the unit until the hour  
flashes in the LCD with the flickering alarm icon.  
2. Press NEXT/TUNE UP button or PREVIOUS/TUNE DOWN  
button to adjust hour.  
3. Press ALARM button to confirm. And the minute flashes to  
wait for you adjust.  
4. Use NEXT/TUNE UP button or PREVIOUS/TUNE DOWN  
button to adjust minute.  
5. Press ALARM button again to save.  
6. Use NEXT/TUNE UP button or PREVIOUS/TUNE DOWN  
button to select the alarm mode (b b- when the alarm comes  
on, the unit will sound Bi Bi... Fun- when the alarm comes on,  
the unit will be turned on.)  
7. Finally, use ALARM button to save all settings.  
Press ALARM button to enable or disable the function. The  
LCD show Alarm icon while the alarm is on.  
Note: The alarm only could be set in standby mode.  
There are two clips on the AM antenna in. Press these  
two clips to connect the AM antenna easily as the  
illustration for AM reception.  
SET TIMER  
The timer function is used to time for reminding while cooking.  
Set the timer as below procedures:  
1. Press TIME button repeatedly to select the approximate time  
among 10, 15, 30, 45, 60, 75, 90, 180, OFF.  
2. Then use TUNE UP/DOWN button to increase or decrease  
the minute for exact time  
3. Press OK button to confirm.  
When it reminds with sound, press TIME button to stop it.  
After setting the timer, press COUNT DOWN button on the unit  
or COUNT DOWN button on the remote to check the remain  
time.  
6. Adjust the volume level to a comfortable listening level.  
7. Press the POWER button to turn off the radio.  
Note: If a particular FM (STEREO) station is weak, or you hear  
too much background noise, press ANGLE/ST/MONO button  
on the remote to switch FM (MONO). This can often result in a  
DVB OPERATIONS  
GET STARTED  
y
Be sure the TV antenna is connected to your player  
properly;  
much clearer reception.  
y
Power on the player and press FUNCTION button several  
times to switch to DVB-T mode and DVD/DVB-T indicator is  
lit.  
A dialogue of first time installation shows on the screen, select  
YES option to perform the first time installation, then select the  
options as mentioned in the dialogue to finish the first time  
installation, select NO option to exit this interface.  
TO STORE THE RADIO STATION (UP TO 10 FOR AM / 30  
FOR FM)  
1. Press BAND button to select your desired band and tune to  
your favorite station via TUNE UP/DOWN button.  
2. Press memory button and select the stored position via MEM  
UP/DOWN button.  
3. Press MEMORY button to save the radio station and exit the  
memory mode.  
Note: The relative information will be shown in the LCD during  
the procedures of saving radio station.  
To recall the saved station, Press MEM UP/DOWN button  
directly to select your desired station saved in the memory for  
listening.  
LANGUAGE  
Press AUDIO button on the remote repeatedly to select  
preferred audio language by TV programs provided during DVB  
mode.  
DISPLAY PROGRAM DETAIL INFORMATION  
Press DISPLAY button during DVB play mode to show the  
program detail information.  
SET TIME  
Please set time as the below procedure:  
1. Press standby button to switch to standby mode and press  
CD DOOR OPEN/CLOSE button on the unit, the hours  
flickers for adjusting.  
ELECTRONIC PROGRAM GUIDE  
Press Program/EPG Button during DVB play mode to skim  
over TV Programs guide.  
GB-6  
 
TELETEXT  
2. System config  
Press TEXT button to display teletext.  
TV setting  
TV system: it is used to select TV system.  
TV type: it is used to select the TV scan mode, please set as  
per your TV set.  
Options: 4:3PS : Normal Pan & scan mode  
4:3LB : Normal Letter box mode  
SEARCH A PROGRAM  
y
y
Press NEXT&TUNE UP or PREVIOUS/TUNE DOWN  
button on the main unit or NAVIGATION UP/DOWN button  
on the remote to change the channel number. A desired  
channel can be reached using these two keys.  
Once the desired channel is selected, it should start  
broadcasting the selected channel immediately. In the  
event that it only shows the channel information for couple  
seconds and then change to black screen, this selected  
channel is verified as a scrambled channel. It is able to  
press the TUNE UP OR TUNE DOWN button on the main  
unit or NAVIGATION UP/DOWN buttons on the remote to  
skip the scrambled channel.  
16:9 : 16:9 wide screen mode  
Video setting  
BRIGHTNESS - to set the brightness for the display.  
CONTRAST - to set the contrast effect for display.  
HUE - to set the colour impression for display.  
SATURATION - to set the saturation level for display.  
Language  
Please select one of desired language for the system.  
Parent Control  
y
During DVB play mode, press FUNCTION button to switch  
to RADIO play mode.  
Change pin - It is used to change the password. Input user's  
password "0000" to unlock it. Change the password as the  
prompt.  
Channel lock - it is used to Lock the channels.  
Time setting  
Time zone - it is used to select local time zone.  
System info  
Connecting the Aerial to the player  
Aerial input  
CABLE  
Select this option, the system info shows on the screen such as:  
Update date, Tuner info, F/w version, Model version etc. Press  
SETUP button to exit.  
Optional  
3. Installation  
Auto Scan - select one of country from <select area> row, then  
enter <start scan> row by navigation button to begin scanning  
the channels.  
Manual scan - scroll to manual scan option, a dialogue shows  
on the screen for you to set, after then, select <start scan>  
option to begin scanning the channels.  
Default setup - select this option to restore the factory setting.  
1. When this player is connect to the outdoor aerial, make sure  
that the TV programme is available from the signal tower.  
2. The quality of video is depend on the signal strength.  
3. When this player is connect to the outdoor aerial, in avoid  
that the huge buildings or obstacle would block the signal.  
Note: In some areas the indoor aerial terminal may different, if  
the terminal is not fitted to your player, a connector is available  
for you to connect between Cable and player. Please refer to  
the above illustration.  
Press SETUP Button once, a video menu will be displayed on  
the screen. Please set the item as your desire.  
Remark: press setup button to return previous setup menu  
during setup.  
1. Channel Guide  
TV channels - It is used to enter the TV channels list for you to  
select or sort the TV channels as your desired.  
Radio channels - It is used to enter the Radio channels list for  
you to select or sort the Radio channels as your desired.  
Channels class - Select this option to edit the programs as  
your desired.  
Channels edit - Select this option to edit the channels name,  
move or delete the channels as your desired.  
GB-7  
 
TROUBLESHOOTING  
If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center.  
Symptom  
Check  
Power does not turn on or  
suddenly turns off.  
x
x
Make sure the AC cord is securely plugged into AC socket and an AC outlet.  
Turn the power off and then back on.  
Remote control won't work  
x
x
x
x
Check that the battery is inserted in the "+" and "-" direction properly.  
The battery may be flat. Replace it with a new one.  
Check that the signal transmission is directed at the remote control sensor on the DVD player.  
Remove the obstacle between the remote controller and remote control sensor.  
No picture or sound  
x
x
x
x
x
x
x
x
x
x
x
Check that the A/V cables are securely connected.  
Check that the disc is a DVD (region number 2 or all), DVD-RW or AUDIO CD.  
Do not use a disc that has scratches or dirt.  
Check that the label-side of the disc is facing up.  
The pick-up lens of the DVD player may be dirty. Contact the service center for lens cleaning.  
Check that the TV channel is set to VIDEO or AV if viewing with a TV.  
Check image brightness and contrast settings.  
Check if TV signal is strong or not.  
No picture  
No sound  
Check that the LCD display is turned on.  
Check the volume setting. If set to zero, turn up volume level.  
Check that the headphones are plugged into the PHONES socket.  
Speakers cannot be used with the headphones.  
No picture and sound  
x
x
x
Check that the battery is properly installed and AC cord is properly connected.  
Use a disc without scratches or dents.  
Distorted video or sound  
Image is unclear or distorted  
Check the direction, position and connection of the antenna.  
No image or image is black  
and white  
x
x
Adjust color settings.  
Check color settings.  
CAUTION  
y
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed  
on the apparatus.  
y
y
Minimum distances 2.0cm around the apparatus for sufficient ventilation.  
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths,  
curtains, etc.  
y
y
No naked flame sources, such as lighted candles, should be placed on the apparatus.  
When the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily  
operable.  
y
y
The use of apparatus is in tropical and/or moderate climates.  
Attention should be drawn to the environmental aspects of battery disposal.  
SPECIFICATIONS  
Audio signal output:  
1. DVD (linear audio)  
Power source: AC 230V 50Hz  
DC input: 12V - 2000mA  
Remote control: CR 2025  
Receiving bands: AM/FM  
Tuning range: AM 522 - 1620 KHz  
FM 87.5 -108 MHz  
(1) Frequency response:20Hz-20KHz  
(2) S/N ratio: >50dB  
(3) Dynamic range: 90dB  
2. CD audio:  
(1) Frequency response: 20Hz-20KHz  
(2) S/N ratio: >50dB  
(3) Dynamic range: 90dB  
Power consumption: 28W  
TV Output (DVD): NTSC/PAL/AUTO  
Operating Temperature Range: +5°C to +35°C  
LCD display: 10.1"  
Dimensions: 375(L) x 272(W) x 58(H)mm  
Operating Humidity Range:10 % to 75 %  
Disc supportable: CD, CD-R, CD-RW, DVD, DVD-R, DVD-RW,  
DVD+R, DVD+RW  
Specifications are subject to change without notice.  
Support disc format: DVD/MP3/KODAK PHOTO CD/JPEG  
GB-8  
 
Please install the unit as the following illustration.  
Template  
Spacer X 4  
1
2
Assign the spacers  
Mounting screw  
3
4
If at any time in the future you should need to dispose of this product please note that: Waste electrical  
products should not be disposed of with household waste. Please recycle where facilities exist. Check with  
your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)  
GB-9  
 

Lasko Fan 6410 User Manual
Lenovo Personal Computer 10102 4773 [C340] User Manual
LG Electronics Car Satellite TV System 22LK335C User Manual
Lincoln Electric Welder IM 513 B User Manual
Linksys Network Router WRT54G3GV2 ST User Manual
LogTag Recorders Thermometer LogTag Analyzer Temperature Recorder User Manual
Majestic Appliances Indoor Fireplace UVLC18 User Manual
Makita Computer Monitor BSS500 User Manual
Manitowoc Ice Ice Maker S1470C User Manual
Mattel Games K8820 User Manual