LA Audio Electronic Stereo Amplifier UB292 User Manual

UB292  
Stereo Headphone Amplifier  
The stereo headphone amplifier is capable of driving headphones of impedance range of 8R to 600R. The inputs are unbalanced on  
duplicated connectors to allow daisy chaining for distributed headphone systems.  
Volume is controlled by a front panel potentiometer. The module has sufficient gain -10dBv input signals to fully drive high-  
impedance headphones.  
THis modules is designed for recording studios, discotheques, audio visual facilities, and for headphone distribution in record stores  
and museums.  
CONNECTIONS AND CONTROLS  
Headphone  
UB292  
Amplifier  
Left  
In  
Left  
In  
Right  
In  
Volume  
Right  
In  
Output  
+15v  
0V  
-15v  
SPECIFICATIONS  
BLOCK DIAGRAM  
+0/-0.05dB, 20Hz to 20kHz  
< 0.05% 1kHz, 0.1W, 8R  
Frequency Response  
Signal to Noise Ratio  
Left In  
26dB maximum  
47k unbalanced  
Gain  
Input impedance  
+26dB  
+26dB  
2 x 0.1W into 8R  
2 x 0.15W into 200R  
2 x 0.08W into 600R  
Output power  
Volume  
Output  
Tip = Left  
Ring = Right  
Right In  
+/-15V @ 40mA  
POWER SUPPLY  
In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice.  
Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ.  
Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: [email protected]  
A U D I O  
An SCV International Group Company.  
Rev 1.0 11/00.  
 

Krell Industries Stereo Amplifier KAV400xi User Manual
KWC Indoor Furnishings K10K133 User Manual
KWC Indoor Furnishings K28H31000099 User Manual
Kyocera All in One Printer 4500i User Manual
Lightolier Work Light LGS Series User Manual
Lincoln Automobile MKT User Manual
Linksys IP Phone CIT200 User Manual
Linksys Network Router WET54GS5 User Manual
Marantz Universal Remote RC9001 User Manual
McCulloch Lawn Mower MC19538LT User Manual